后入欧美美女在线视频|?v在观线观看男人的天堂|国产美女高潮一区视频|久久精品国产av久|中日韩精品激情在线观看网站|国产高清在线在线视频|欧美成人午夜大片在线观看|欧美乱码一区二区三区在线

2024

2024

  • Record 349 of

    Title:Design of Optical-mechanical System of Catadioptric Aerial Mapping Camera Based on Secondary Mirror Image Motion Compensation
    Author Full Names:Zhang, Hongwei(1); Qu, Rui(1); Chen, Weining(1); Yang, Hongtao(1)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Aerial surveying and mapping is an important technical means of civil/military surveying and mapping,which can quickly obtain large-scale and high-precision scale mapping of the target area in a short period of time,and accurately obtain coordinate information of the target plane and elevation information on the map. The acquired information plays an important supporting role in digital city construction,land resources survey,military strategic planning,etc. With the development of aerial surveying and mapping technology,the requirements for aerial mapping cameras have been further improved. It is required that aerial mapping cameras can achieve wide width,high precision and large scale mapping. In order to meet the above requirements,the aerial mapping camera adopts scan imaging mode,but this imaging mechanism will introduce forward/scan image motion,which will affect the image quality. In order to satisfy the image stabilization accuracy of the aerial mapping camera,it is necessary to compensate the image motions. Therefore,a catadioptric aerial mapping camera based on secondary mirror image motion compensation is designed in this paper. Aiming at the dynamic image motion problem of the aerial mapping camera in the process of ground swing imaging,the vector aberration theory for a two-mirror telescopic systems is adopted. The secondary mirror is used as the image motion compensation element, and the comprehensive image motion compensation of the aerial mapping camera is realized through the secondary mirror multi-dimensional motion. However,in the process of compensating the image motion,the secondary mirror will be eccentric and inclined,which will cause the secondary mirror to be off-axis and affect the image quality. Therefore,a misalignment optical system model is established to study the relationship between the deviation vector of the secondary mirror field and the misalignment of the secondary mirror field,and the influence of the secondary mirror motion on the image quality is analyzed. Meanwhile,a design example of the optical-mechanical system of the catadioptric aerial mapping camera based on the secondary mirror image motion compensation is given. The effective focal length of the optical system is 450 mm,and the working spectrum is 435~900 nm. The field of view of the optical system is 4.17×3.13,and the F-number is 4.2. In the design process,the optical-mechanical system of aerial mapping camera adopts non-thermal design to adapt to the working environment of ?40 ℃~60 ℃. In order to verify the image motion compensation ability of multi-dimensional motion of the optical element,an experimental platform is built to conduct laboratory imaging tests and field imaging tests on the aerial mapping camera. The laboratory imaging test results show that the dynamic resolution of the aerial mapping camera using the image motion compensation technology can reach 74 lp/mm,and the image motion compensation accuracy is better than 0.5 pixels,which meets the design expectation. In addition,the field imaging test results show that compared with disable image motion compensation function,the aerial survey camera with enable image motion compensation function can acquire sharp edges,clear images,and image quality can meet the expected requirements. Therefore,the camera has the advantages of high accuracy of image motion compensation,compact volume and high reliability,which lays a theoretical foundation for the direction of light and small,high precision and large scale mapping. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Aircraft Optical Imaging and Monitoring and Measurement Technology Laboratory, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China
    Publication Year:2024
    Volume:53
    Issue:2
    Article Number:0222001
    DOI Link:10.3788/gzxb20245302.0222001
    數據庫ID(收錄號):20240715561717
  • Record 350 of

    Title:Optimization Design of Large Aperture Curved Prism Bonding Based on Finite Element Analysis
    Author Full Names:Feng, Jun(1,2); Li, Siyuan(1); Wang, Feicheng(1,2); Chen, Wencong(1,2); Tian, Feifei(1,2); Jia, Xinyin(1)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Aiming at the working conditions and performance requirements of large-diameter curved prisms with high face shape precision,an optimized design approach is proposed for bonding such prisms while considering the adhesive curing shrinkage stress. Based on this approach,the bonding process for large-diameter curved prisms is successfully optimized. Firstly,the finite element differential equation for the shrinkage stress during glue curing is derived based on the non-free curing model of the glue. Secondly,by applying the principles of support structure design and flexible structure design theory,a meticulously devised circular flexible bonding structure was created. The topology of the frame structure was optimized with flexibility as the primary objective while adhering to structural weight constraints,resulting in an impressive lightweight rate of 55.79%. Subsequently,a simulation and analysis model was developed to investigate the impact of adhesive curing shrinkage on mirror surface shape using the temperature loading method. The response surface model for the colloid parameters' equivalent gel contraction force was established,achieving a goodness of fit of 97.56%. It was found that the equivalent gel contraction force increased with the increase of colloid contraction rate and thickness. Additionally,the equivalent gel contraction force and the area of colloid spot exhibited different monotonous increasing and decreasing trends under varying gel contraction rates. The degree of influence of colloid contraction rate on the equivalent gel contraction force was found to be the largest,while the area of colloid spot had the least influence on the equivalent gel contraction force. The optimized parameters for the colloid were determined to be 9 mm×23 mm×0.1 mm. The study investigated the influence of adhesive type,gel parameters,and bonding quantity on the surface shape of curved prism components. The results obtained from the surface shape simulation analysis of curved prisms using three kinds of epoxy adhesives(3M-2216,Milbond,and GHJ-01)under the same conditions were compared in terms of relevant properties of adhesive materials. The influence of surface shapes before and after curing was also examined to compare the performance of the adhesives. It was determined that the 3M-2216 adhesive exhibited optimum performance among the three kinds of adhesives. With the increase in the number of bonds,the deformation value of the front and rear mirrors shows a trend of decreasing and then increasing. The maximum stress value shows a fluctuating downward trend,while the average stress value shows a trend of decreasing and then slowly increasing. When bonded with 6 glue dots,the deformation of the upper and lower dome positions can be precisely restrained,so that the maximum deformation is concentrated in the center of the mirror. The deformation value and stress value are smaller. In summary,an optimized solution for high face shape accuracy is obtained by choosing 3m-2216 epoxy adhesive,designing arc-shaped glue spots and their flexible bonding structure. Under these conditions,with 6 glue spots on each side and a homogeneous distribution of gluing,it was found that the PV value for face shape accuracy of the curved prism's front mirror face is 2.78 nm with an RMS value of 0.53 nm;for its back mirror face,it is 1.58 nm with an RMS value of 0.31 nm which is 98% lower than that of the initial structure. Compared to the initial structure,wavefront error caused by adhesive curing has been reduced by 98.89%. Additionally,environmental adaptability was analyzed using the finite element method: Z-direction self-weight significantly impacts curved prism assembly followed by X-direction;Y-direction has the least effect. The maximum deformation observed in the assembly is at its upper surface center(67.6 nm),while the maximum stress value(0.18 MPa)is found on the bonding surface of the bonding ring. For front mirror surface shape accuracy:X-direction self-weight plays a major influence with PV value being 16.3 nm and RMS value of 3.61 nm;whereas for rear mirror surface,Z-direction self-weight plays a dominant role with PV value of 29.3 nm and RMS value of 5.34 nm. The thermal deformation and thermal stress reach their maximum values when subjected to a uniform temperature rise of 4 ℃ on gel material. As the temperature gradient increases,both thermal deformation and thermal stress initially decrease before increasing again. Among different temperature gradients tested,a rise in temperature gradient by 3 ℃ shows minimal impact on curved prism assembly,which validates its structural design's rationality. After implementing an optimized gluing scheme,the face shape accuracy for curved prism mirrors is less than 0.059λ in terms of PV value,and less than 0.012λ in terms of RMS value. This proposed gluing optimization scheme considers shrinkage stress during the curing process,meeting high-precision optical system requirements. The findings from this study can serve as a reference for optimizing high-face shape precision gluing schemes and support structure designs for large-diameter curved prisms. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:53
    Issue:11
    Article Number:1122002
    DOI Link:10.3788/gzxb20245311.1122002
    數據庫ID(收錄號):20245117558554
  • Record 351 of

    Title:Fourier ptychographic reconstruction with denoising diffusion probabilistic models
    Author Full Names:Wu, Kai(1,2); Pan, An(1); Gao, Wei(1)
    Source Title:Optics and Laser Technology
    Language:English
    Document Type:Journal article (JA)
    Abstract:Fourier ptychographic microscopy (FPM) is a promising computational imaging technique that can bypass the diffraction limit of the objective lens and achieve high-resolution, wide field-of-view imaging. The FPM setups firstly capture a series of low-resolution (LR) intensity images by angle-varied illumination and then reconstruction algorithms recover the high-resolution (HR) complex-valued object from the LR measurements. The image acquisition process commonly introduces noise, ultimately leading to degradation in the quality of the reconstruction results. In this paper, we report a noise-robust Fourier ptychographic reconstruction method that generates the HR complex-valued object estimation using the image priors specified by denoising diffusion probabilistic models (DDPM). First, the initial estimation of the HR complex-valued object is matched with an intermediate state in the Markov chain defined by DDPM. Then, the noisy initial solution is iteratively updated to a high-quality reconstruction result in the reverse process of DDPM and gradient descent correction is incorporated to enforce data consistency with the LR measurements. The proposed method integrates DDPM specified image priors and gradient descent correction, achieving solutions with less noise-related artifacts and high fidelity for HR complex-valued object estimation in Fourier ptychographic reconstruction. We apply the proposed method on both synthetic and real captured data. The experimental results show that our method can efficiently suppress the impact of noise and improve reconstruction results quality. ? 2024 Elsevier Ltd
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:176
    Article Number:111016
    DOI Link:10.1016/j.optlastec.2024.111016
    數據庫ID(收錄號):20241715963426
  • Record 352 of

    Title:Temperature Measurement Method for Small Target Medium-Wave Infrared Spectral Radiation Based on Distance Correction
    Author Full Names:Li, Wen-Kai(1,2); Zhou, Liang(1); Liu, Zhao-Hui(1); Gui, Kai(1); Liu, Kai(1); Li, Zhi-Guo(1); Xie, Mei-Lin(1)
    Source Title:Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:For long-distance space targets moving at high speeds, temperature is one of the important parameters to characterize their working state and performance. Accurately obtaining the temperature of the target has an important reference value for judging its motion state and predicting its situation development. At present, the commonly used processing method of surface target or point target is no longer applicable to the measurement of the radiation characteristics of small targets. At the same time, spectral detection increases the distinguishable information of the target in the wavelength dimension, which can accurately obtain the distribution of the target energy with wavelength, providing a possibility for the inversion of the target temperature, and has great application potential. The slitless spectrometer can reduce the requirements for tracking and stabilization accuracy of space targets, has the characteristics of simple structure, high frame rate and fast response speed, and has high application value in astronomical observation and spacecraft observation. In this paper, we analyzed the spectral calibration model of target infrared radiation characteristic measurement and determined the main parameters in the linear response model of infrared detector pixels. In order to reduce the influence of imaging distance on temperature measurement accuracy, we proposed a target temperature inversion model based on distance correction. The improved temperature measurement accuracy meets the accuracy requirements in practical engineering applications and greatly affects infrared radiation spectrum temperature measurement. Certain guiding significance. ? 2024 Science Press. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:44
    Issue:4
    Start Page:1158-1164
    DOI Link:10.3964/j.issn.1000-0593(2024)04-1158-07
    數據庫ID(收錄號):20241515866101
  • Record 353 of

    Title:Laser Center Extraction Method of Circular Linear Structure Profile Measurement Based on Cluster Segmentation
    Author Full Names:Yan, Xingxu(1); Du, Hubing(1); Feng, Leijie(1); Li, Yanjie(1); Jia, Jinge(2); Zhang, Gaopeng(3)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Hole parts, such as bearings, cylinders, hydraulic cylinders, and artillery body tubes, are important to the field of aviation, spaceflight, auto, machine tool and heavy equipment manufacture industry. However, the inspection of inner surface quality of this kind of parts, especially deep hole inner surface, remains a difficult problem in the manufacturing field. More specifically, the difficulty of inspection system mainly lies in two aspects:firstly, the workspace is narrow, making it difficult to effectively use the existing inspection technologies;secondly, due to the limitations of the non-open space of the inner surface, it is easy to form blind zone during the task of measurement. To satisfied with the increasing requirements of quality inspection in above fields, some scholars have applied the optical method into the measurement system of hole parts because of its advantage of high accuracy, high robustness, rapid speed, non-contact, and low cost. However, when measuring inner surface of hole parts, the optical method often presents the problem of a limited or occluded field of view for the characteristics of hole parts. Due to the problem of occlusion, the well-known fringe projection profilometry cannot projected the fringe pattern to the inner surface and the desired deformed fringe pattern cannot be captured by a camera accordingly. So, circular structured light 3D measurement technology has been extensively employed to inspect accuracy of the hole parts, which is an active vision measurement technology based on the laser triangulation principle. Many works have been done to enhance the performance of circular structured light technique. However, occlusions are problematic because the light source and camera are placed on the same side of the measured object in the exiting technique. Additionally, the technique may be disturbed by speckle noise when metal surface is measured. Consequently, for structured light measurement technology, it is necessary to develop an efficient preprocess method to eliminate the disturbance to the most extent because the performance of the technology largely depends on high quality images. But this problem remains unsolved so far to our knowledge. In the work, the circular linear structure profile measurement method is proposed to inspect the quality of internal surfaces of hole parts. In our method, the light source and the image sensor are arranged on either side of the object to be measured to get a clear view during data acquisition. However, the proposed circular structure profile measurement technique is seriously affected by the quality of the extraction of the center of the laser center when a metal surface is measured. Concerned that removing the image of the light source used in the setup and laser speckle effect is vital to center extraction of circular structured light, in this paper, a clustered segmentation-based center extraction method is developed. The process of our method is as follows:The maximum inter class variance(OTSU)method is firstly used to adaptively segment the captured laser image into two parts:background and target image;then, the clustering method is used to separate the laser light source image and the laser speckle in the captured laser image;finally, sub-pixel laser center extraction is realized with help of the well-known Steger algorithm. Both simulation and experiment validate the correctness of the proposed method. The experimental results show that the proposed method can well suppress the influence of the laser light source image and the laser speckle during the extraction of the center of the laser center when compared with the typical filtering methods, such as median filtering. In addition, the proposed method can fulfil the task of center extraction efficiently, stably, and reliably. Therefore, it provides an effective way of extraction of laser center for three-dimensional contour measurement of deep hole parts. In the future work, we will focus on the development of accurate calibration method to convert 2D light stripes information into 3D coordinate information. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) School of Mechanical and Electrical Engineering, Xi'an University of Technology, Xi'an; 710021, China; (2) Xi'an Future Intelligent Manufacturing Digital Technology Co., Ltd., Xi'an; 710000, China; (3) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China
    Publication Year:2024
    Volume:53
    Issue:11
    Article Number:1112004
    DOI Link:10.3788/gzxb20245311.1112004
    數據庫ID(收錄號):20245117548489
  • Record 354 of

    Title:Blind deep-learning based preprocessing method for Fourier ptychographic microscopy
    Author Full Names:Wu, Kai(1,2); Pan, An(1); Sun, Zhonghan(1); Shi, Yinxia(1,2); Gao, Wei(1)
    Source Title:Optics and Laser Technology
    Language:English
    Document Type:Journal article (JA)
    Abstract:Fourier ptychographic microscopy (FPM) is a technique for tackling the trade-off between the resolution and the imaging field of view by combining the techniques from aperture synthesis and phase retrieval to estimate the complex object from a series of low-resolution intensity images captured under angle-varied illumination. The captured images are commonly corrupted by multiple noise, leading to the degradation of the reconstructed image quality. Typically speaking, the noise model and noise level of the experimental images are unknown, and the traditional image denoising methods have limited effect. In this paper we model the FPM forward imaging process corrupted by noise and divide the noise in the captured images into two parts: the signal-dependent part and the signal-independent part. Based on the noise model we propose a novel blind deep-learning based Fourier ptychographic microscopy preprocessing method, termed BDFP, for removing these two components of noise. First, from a portion of the captured low-resolution images, a set of blocks corresponding to the smooth area of the object are extracted to model signal-independent noise. Second, under the assumption that the signal-dependent noise follows a Poisson distribution, we add Poisson noise and signal-independent noise blocks to clean images to form a paired training dataset, which is then used for training a deep convolutional neural network (CNN) model to reduce both signal-dependent noise and signal-independent noise. The proposed blind preprocessing method, combining with typical FPM reconstruction algorithms, is tested on simulated data and experimental images. Experimental results show that our preprocessing method can significantly reduce the noise in the captured images and bring about effective improvements in reconstructed image quality. ? 2023 Elsevier Ltd
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:169
    Article Number:110140
    DOI Link:10.1016/j.optlastec.2023.110140
    數據庫ID(收錄號):20234014830596
  • Record 355 of

    Title:Dual Optical Target Recognition Method for Collimated Images Based on BLOB Region and Edge Feature Analysis
    Author Full Names:He, Wenxuan(1,2); Wang, Zhengzhou(1); Wei, Jitong(1); Wang, Li(1); Yi, Dongchi(1)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:In order to solve the problem that the collimated target recognition algorithm of optical path docking cannot distinguish the adhesive state of double targets,a new method of collimated image dual optical target recognition based on Binary Large Object(BLOB)region feature analysis is proposed. There are two optical targets in the optical alignment image,that is,the simulated optical target and the main laser target. In the initial beam control stage,the positions of the two optical targets are random and uncertain,and there is a possibility of the two optical targets sticking together,which causes great difficulties in beam control. Therefore,optical path alignment needs to solve the image recognition problem in two cases:1)In the initial beam control stage,when the main laser beam and the analog beam are just introduced,the adhesion recognition algorithm needs to be used to identify the adhesion state of the two optical targets. If the two optical targets are in the adhesion state,the two targets need to be completely separated by adjusting the 2D frame BM6XY motor;2) In the case of two optical targets completely separated,it is necessary to distinguish between the analog light target and main laser target in the two optical targets. Firstly,the binary image is processed by digital morphology to calculate the area,center Cxy,axis length lenxy and region Reginxy,of each BLOB region in the whole image. Secondly,the number of valid BLOB regions vblobcount is counted,and the distance between the two maximum connected domains dir is calculated. When vblobcount>1 and dir>100,the collimation image is the completely separated double target image,otherwise it is the adhered image. Then,for the completely separated dual-target image,the number of BLOBs located in the two largest BLOB regions with the center of each BLOB region is counted. The small number of candidate BLOB regions is the main laser target,and the large number of candidate BLOB regions is the analog light target. Finally,for the adhered image,when dir ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100039, China
    Publication Year:2024
    Volume:53
    Issue:2
    Article Number:0210001
    DOI Link:10.3788/gzxb20245302.0210001
    數據庫ID(收錄號):20240715561765
  • Record 356 of

    Title:A design of compact plasmonic lens consisting of high index dielectric gratings and metal nano-film
    Author Full Names:Jia, Sen(1); Wang, Xianhua(1); Zhou, Libing(2)
    Source Title:Optics Communications
    Language:English
    Document Type:Journal article (JA)
    Abstract:In this paper, a hybrid ultra-thin planar subwavelength focusing structure consisting of a high refractive index dielectric grating and a nano metal film was designed. The thickness of this structure is only 200 nm. Surface plasmon polaritons (SPPs) were excited from the nano metal film, propagated along the metal-air interface, and were then converted into a radiation field by the dielectric grating, forming a focused spot in free space. By adjusting the grating position and width parameters, the shape of the focused optical field could be controlled. The simulation results showed that, under 532 nm light irradiation, the lens could produce a 270 nm (full width at half-maximum, FWHM) spot size at a focal length of 2.46λ. Moreover, under the illumination of 633 nm and 780 nm light, the designed lenses were found to produce focal spot sizes of 304 nm (0.48λ) and 364 nm (0.47λ), respectively, which were smaller than the diffraction limit. The simplicity of this plasmonic lens design, coupled with its reduced thickness and minimal absorption loss, offered significant advantages in terms of cost-effectiveness and ease of fabrication. ? 2024 Elsevier B.V.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) School of Physics and Information, Shaanxi University of Science and Technology, Xi'an; 710021, China
    Publication Year:2024
    Volume:570
    Article Number:130928
    DOI Link:10.1016/j.optcom.2024.130928
    數據庫ID(收錄號):20243216819587
  • Record 357 of

    Title:Tracking control of flexible link manipulator with joint space constraints
    Author Full Names:Jing, Feng(1,2); Ma, Caiwen(1,2); Cao, Yu(1); Xie, Meilin(1); Wang, Fan(1); Liu, Peng(1); Fan, Xiao(1)
    Source Title:Journal of Physics: Conference Series
    Language:English
    Document Type:Conference article (CA)
    Conference Title:2024 7th International Conference on Intelligent Manufacturing and Automation, IMA 2024
    Conference Date:January 12, 2024 - January 14, 2024
    Conference Location:Virtual, Online, China
    Abstract:A controller design with system uncertainties, external disturbances, and joint space constraints for a flexible link manipulator (FLM) is presented in this paper. To overcome the lumped disturbance and ensure that the joint space constraints are not violated, a finite-time extended state observer (ESO) and a barrier Lyapunov function are constructed. Using Lyapunov's theory, the error of the system is proved to be semi-globally ultimately uniformly bounded without violating the constraints. Finally, the rationality of the proposed methodology is verified by numerical simulation. ? Published under licence by IOP Publishing Ltd.
    Affiliations:(1) Xi'An Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:2787
    Issue:1
    Article Number:012043
    DOI Link:10.1088/1742-6596/2787/1/012043
    數據庫ID(收錄號):20242816660786
  • Record 358 of

    Title:Splitting rules of the channeled modulation polarization imaging technology for different polarization detection requirements
    Author Full Names:Zhang, Ning(1); Zhang, Yunyao(2); Li, Siyaun(1)
    Source Title:Proceedings of SPIE - The International Society for Optical Engineering
    Language:English
    Document Type:Conference article (CA)
    Conference Title:2024 Conference on Spectral Technology and Applications, CSTA 2024
    Conference Date:May 9, 2024 - May 11, 2024
    Conference Location:Dalian, China
    Conference Sponsor:Chinese Society for Optical Engineering
    Abstract:Channeled modulation polarization imaging technology can obtain full polarization information of targets through a single frame of image, with advantages such as compact, low cost, and without electric rotating accessories. It has important application value in remote sensing, biomedical, national defense, and so on. The key point of channeled modulation polarization imaging technology is to modulate the four Stokes parameters that characterize polarization to different carried frequencies through amplitude modulation, and then use the frequency domain to separate the four two-dimensional Stokes parameters. Different channels are intercepted by a bandpass filter and subjected to inverse Fourier transform, which can achieve four two-dimensional distribution pictures of the Stokes parameters. Interference is the core of this technology, which is achieved through birefringent crystals or spectroscopic interferometers. After splitting, interference occurs in the focal plane, generating carrier frequency. However, a serious problem has been troubling researchers in this field, which is how to design birefringent crystals to achieve amplitude modulation of Stokes parameters. The amplitude of the interference fringes of the beams needs to be divided corresponds one-to-one with the Stokes parameter after interference. The current spectroscopic design mainly relies on experience and luck, lacking unified standards, which will affect the efficiency of system design. To solve this problem, relying on the representation of the electric field vector of light, the mathematical expression of Stokes parameters and the corresponding relationship with the spectral results are analyzed in reverse. Then, based on the physical meaning of Stokes parameters, phase modulation is used to achieve the representation of certain parameters for the sum of light intensities and the representation of certain parameters for the difference in light intensities. Ultimately, a correspondence is formed between different spectroscopic results and the detected polarization parameters and proposed modulation criteria for channeled modulation by linking the physical meaning and mathematical model of Stokes parameters. On the one hand, this study is beneficial for the targeted design of channeled modulation polarization imaging technology in different application scenarios for different parameter detection requirements, and on the other hand, it can guide the design of optical systems for different spectral requirements in birefringent crystal design, making the design of this technology more standardized. ? 2024 SPIE.
    Affiliations:(1) Key Laboratory of Spectral Imaging Technology, Xi'an Institute of Optics and Precision Mechanics of Cas, Xi'an; 710119, China; (2) College of Information Science and Technology, Northwest University, Xi'an; 710126, China
    Publication Year:2024
    Volume:13283
    Article Number:1328325
    DOI Link:10.1117/12.3036652
    數據庫ID(收錄號):20245217584034
  • Record 359 of

    Title:Observation of Superoscillation Superlattices
    Author Full Names:Ma, Xin(1); Zhang, Hao(1); Wei, Wenjun(1); Tai, Yuping(1); Li, Xinzhong(1,2,3); Shen, Yijie(4,5)
    Source Title:arXiv
    Language:English
    Document Type:Preprint (PP)
    Abstract:Superoscillation (SO) wavefunctions, that locally oscillate much faster than its fastest Fourier component, in light waves have enhanced optical technologies beyond diffraction limits, but never been controlled into 2D periodic lattices. Here, we report the 2D superoscillation lattices (SOL) with controlled symmetries, where the local wavevector can be ~700 times larger than the global maximal wavevector (k0) in a localized region ~100 times smaller than the global minimal wavelength (λ0). We also demonstrate the superoscillation superlattices (SOSL) as twisted bilayer Moirépatterns of two SOL, akin to the magic angle tuning in advanced twistronics, we can continually tune the on-demand SO with local maximal wavevector in a range of 450k0–700k0 and with ~ λ0/100–λ0/1000. The twistronic SOSL will advance optical imaging and metrology into extreme higher-dimensional superresolution.MSC Codes 78 Copyright ? 2024, The Authors. All rights reserved.
    Affiliations:(1) School of Chemistry and Chemical Engineering, School of Physics and Engineering, Henan University of Science and Technology, Luoyang; 471023, China; (2) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'An; 710119, China; (3) Provincial and Ministerial Co-construction of Collaborative Innovation Center for Non-ferrous Metal New Materials and Advanced Processing Technology, Luoyang; 471023, China; (4) Centre for Disruptive Photonic Technologies, School of Physical and Mathematical Sciences, The Photonics Institute, Nanyang Technological University, Singapore; 637371, Singapore; (5) School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore; 639798, Singapore
    Publication Year:2024
    DOI Link:10.48550/arXiv.2409.19565
    數據庫ID(收錄號):20240426023
  • Record 360 of

    Title:High Modulation Depth Terahertz Modulator Based on Side-polished Terahertz Fiber
    Author Full Names:Luo, Zhenyang(1); Tian, Ziping(1); Zhang, Zilong(1); Wei, Longxiang(1); Xie, Manyan(1); Chen, Bingyu(1); Wang, Xingfu(2); Peng, Gangding(3); Kong, Depeng(4); Wei, Yuming(5); Yang, Tiefeng(5); Lu, Huihui(5); Guan, Heyuan(5)
    Source Title:Journal of Lightwave Technology
    Language:English
    Document Type:Article in Press
    Abstract:High modulation depth fiber-based modulators working at terahertz (THz) wavelength are of paramount importance for the application of THz communication technology by taking advantages of the low loss, high interference resistance and strong adaptability THz fiber network. Here, we demonstrate a THz modulator based on side-polished THz fiber combined with GaAs film/Au-nanoparticles (Au-Nps). The Au-Nps and the remaining thickness of the side-polishing are careful designed to achieve target resonance wavelengths. The side-polishing region of fiber provides a flat platform for integrating nanostructures to enhanced light-material interactions which greatly enhances the modulation performance. The experimental results show that this new fiber modulator can achieve the THz wave amplitude modulation under a relatively low irradiation of an external 808 nm laser, with a tunable frequency range of 0.366-1.093 THz and a maximum modulation depth of 99.24%. Besides, resonance frequency can be adjusted by changing the remaining thickness of the device. Moreover, the area of this modulator is only 9 mm2 which can be easily integrated into THz systems. Therefore, we believe our work will contribute to the developments of high-performance fiber-based THz modulator for applications in THz communication system. ? 1983-2012 IEEE.
    Affiliations:(1) Jinan University, Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, Guangzhou; 510632, China; (2) South China Normal University, Guangdong Engineering Research Center of Optoelectronic Functional Materials and Devices, School of Semiconductor Science and Technology, Foshan; 528225, China; (3) University of New South Wales, School of Electrical Engineering and Telecommunications, Sydney; NSW; 2052, Australia; (4) Chinese Academy of Sciences, Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Shaanxi, Xi'an; 710119, China; (5) Jinan University, Key Laboratory of Optoelectronic Information, Sensing Technologies of Guangdong Higher Education Institutes, Guangzhou; 510632, China
    Publication Year:2024
    DOI Link:10.1109/JLT.2024.3509575
    數據庫ID(收錄號):20245017522377
91精品视频在线播放| 又白又嫩毛又多12P| 国产一区电影| 丁香五月婷婷综合| 国产乱伦管| 久久人人操| 婷婷五月天成人| 久久久精品一区二区| а√天堂中文在线资源8| 日本中文在线| 精品无码无套内谢| av第一区| 无码人妻一区二区三区免水牛视频| 在线视频一区二区三区| 国产后入清纯学生妹| a天堂在线| 亚洲永久无码7777kkkk| 日韩美女福利视频| 欧美插逼视频| 91精品人妻| 欧美黑人又粗又大高潮喷水| 被老头玩弄的漂亮人妻| 日本国产视频| 欧美一级在线视频| 狂揉吃奶胸高潮视频免费| 在线日韩视频| 91三级视频| 潮喷视频在线| 午夜成人免费视频| 人妻互换一二三区激情视频| 日韩精品久久久久久久酒店| 国产精品毛片AV| 国产精品久久久久久久久久免费看| 亚洲精品一区杨思敏| 一级a一级a爰片免费免免软件ww| 国产精品一级毛片在码A片 | 亚洲欧美日韩精品久久亚洲区| 国产一级免费av| 夜夜操天天操| 一级a一级a爰片免费免水l软件| 黄色视频大片一级| 亚洲人成在线播放| 91丝袜精品久久久久久无码人妻| 狠狠人妻久久久久久综合| 91色综合| 日韩成人免费在线| 国产农村妇女毛片精品久久麻豆| 极品少妇XXXX精品少妇偷拍| 无码人妻精品一区二区二秋霞影院| av在线视屏| AV中文在线播放| 日韩AV专区| 国产在线不卡| 国产AV一级| 欧美日韩一级黄片| 全部孕妇孕交BBBBBB| 美女裸体无遮挡免费视频| 一级毛片在线播放| 国产精品观看| 久久综合亚洲| 亚洲特黄| 欧美午夜精品一区二区三区电影| 久草人妻在线| 日韩精品欧美在线| 草草影院欧美| 欧美日韩高清丝袜| 人妻免费视频| 亚洲男人天堂网| 粉嫩在线| 日本三级片一区二区三区| 91人妻人人澡| 日韩无码电影院| 国产av电影网站| 亚洲一级黄色录像| 91Av导航| 蜜桃久久久| 天天干天天干天天干天天| 蜜乳av一区二区| 俺去久久啦国产| 色婷婷av一区二区三区大白胸 | 国产精品无码专区AV免费播放| 日韩极品视频| 亚洲欧洲中文字幕| 西西午夜无码大胆啪啪国模 | 国产精品三级片| 香蕉视频色| 色综合天天综合网国产成人网| 99re国产| 亚洲福利网| 日本精品一区| 欧美边做饭边被躁BD在线看| 中国少妇XXXX| 日本黄色不卡视频| 青青青国产| 亚洲熟女乱综合一区二区三区| 亚洲综合无码| 日韩精品一| 在线无码视频| 午夜福利精品| 91天堂| 国产成人一区二区三区| 国产美女毛片| 91老肥熟视频| 波多野吉衣一区二区| 国产一级二级三级视频| AV网站免费观看| 无码国产精品| 国产精品日日做人人爱| 亚洲视频www| 色黄大色黄女片免费看直播| 精品69| 中文字幕一区在线| 无码成人黄网站在线观看| 疯狂操逼亚洲| 国产主播福利| 国产一级A片精品免费高清天套| 黄片三区| 亚洲欧美综合视频| 精品一区视频| 色婷婷综合久久| 岛国三级片在线观看| 91口爆吞精国产对白| 精品久久久久久久久久久国产字幕| 国产一区无码| 99国产精品自拍| 国产精品999久久久| 日本无码在线观看| 国产成人在线视频观看| 欧美日韩精品久久久免费观看| 污视频在线| 尤物网在线观看| 免费无码国产在线观看九色了| 国产无码一区在线观看| 97人伦影院A片在线观看97| 91在线成人| 久久久免费观看| 亚欧洲精品视频在线观看| 久久久艹| 夜精品A片一区二区无码69堂| 欧美特一级| 理论片无码| 日本一区不卡| 国产三级一区二区| 日本熟妇视频| 秋霞三级伦电影| 夜夜爽夜夜操| 无码综合| 99久久国产视频| 久久专区| 国产性爱久久| 久久av一区二区三区| 性虎精品一区二区三区| 人成在线免费视频| 日韩黄色网| 手机在线色| 精品成人| 精品人伦一区二区色婷婷| 欧美精品一区二区三区久久久竹菊| 精品国产AV| 国产精品无码久久久久一区二区| 国产高潮视频| 26uuu精品国产| 国产偷抇久久精品A片91| 国产精品久久久久无码AV绿帽男 | 亚洲综合视频在线| 亚洲中文字幕在线观看| 久久激情综合| 成人日本A片无码| COS| 国产精品久久久久久婷婷天堂| 欧美精品性爱| 欧美日韩系列| 午夜免费小视频| 中文字幕人妻无码系列第三区| 久久一区二区视频| 精品国产99| 韩国精品一区| 欧美一区二区三区在线| 欧美交换配乱吟粗大25P| 日韩欧美中文| 一级黄毛片| 欧美成人第26集| 最新国产视频| 99re只有精品| 性生交大片免费看| 国产精品免费无遮挡无码永久视频| 国产黄色片视频| 青娱乐91| 亚洲成av人片在线观看| 精品人伦一区二区色婷婷| 国产一区在线播放| 欧美日韩免费| 白洁性荡生活第90章| 99国产精品久久久久久久日本竹| 一级免费片| 久久午夜夜伦鲁鲁一区二区| 久久亚洲无码| 亚洲熟女乱伦| 日本久久无码高潮喷水电影| 免费色色网站| 人妻大战黑人白浆狂泄| 日韩中文亚洲第一| 国产精品成人在线观看| 超碰乱伦| 日韩特黄| 欧美精品中文字幕久久二区| 日韩国产成人| 中文无码一区| 国产欧美日韩一区二区三区 | 国产精品激情偷乱一区二区∴| 国产高清不卡| 一本一道久久a久久精品逆3p| 强奸乱伦_第1页_紫色AV| 日韩毛片无码| 精品久久久久久| 国产伦精品一区二区免费| 高清无码国产视频| 国产精品免费区二区三区观看四虎| 国产日韩欧美在线观看| 亚洲综合二区| 亚洲国产欧美日韩| 青青草原国产AV| 一本一道久久a久久精品综合蜜臀| 亚洲AV永久无码国产精品久久| 国产成人精品在线观看| 国产精品第二页| 国产无码激情| 国产精品成人亚洲一区二区| 人人操人人摸人人操| 黄色无码| 岛国大片国产自| 国产精品久| 性国产精品| 亚洲有码一区| av中文在线| 日韩精品一| 国产一级电影| 国产九九九| 国产精品igao视频网网址| 国产无码毛片| 国产天天操| 亚洲激情无码视频| 亚洲色欲色| 国产精品久久久久无码AV八戒| 久久99精品久久久子伦| 日韩一二三四区| 四川一级少妇A片免费| 边操逼| 超碰人人人人人人| 99久久久国产精品无码免费| 伊人精品在线观看| 国产无毛| 无码免费一区二区三区电影| 欧美人和黑人牲交网站上线| 色窝窝无码一区二区三区成人网站| 99热国产在线| 国产人妖| 新久久久久久一级毛片免费看| 中文字幕一区二区三区麻豆木下凛| 亚洲成人自拍| 人妻免费视频| 日韩一区二区在线观看| brazzers欧美| 国产色哟哟| 天天狠天天透| 九色在线视频| 3D动漫精品啪啪一区二区免费| 国产成人在线视频观看| 日本黄色A片| 日本精品视频在线观看| 亚洲AV无码久久久久精品同性| 成人短视频在线观看| 久久亚洲一区二区三区四区| 亚洲欧洲无码AAA片在线观看| 国产黄色小视频| 超碰人妻在线| 高清无码小电影| 99精品无码| 久久精品人妻一区二区 | 久久综合影院| 国产精品免费区二区三区观看四虎| 欧美人妻精品一区二区免费看| 亚洲精品日韩激情在线电影| 丁香五月婷婷在线观看| 日本美女一区二区三区| 一级黄色大片| 操人人视频| 中文精品久久久久人妻不卡无码| 日本精品视频| 国产美女久久| 热久久最新地址| 无码人妻一区二区三区免水牛视频| 黄色电影在线免费观看| 国产高潮白浆无码| 国产精品视频久久| 国产成人在线播放| 国产a一级毛片爽爽影院无码| 少妇| 婷婷在线综合| 国产探花在线精品一区二区| 黄色片视频网站| 偷拍区小说区| 一级α片免费看刺激高潮视频| 国产精品精品| 熟女拳交| 国产剧情自拍| 免费不卡av| 中文字幕国产| 97超碰免费在线观看| 黄色免费网站在线观看| 97看片| 苍井空与黑人90分钟全集| 最新无码在线| 亚洲第一无码| 国产视频资源| 九九九久久久| 一区二区无码视频| 国产伦精品一区二区三区妓女下载| 久久中文字幕av| 伊人久久超碰| 国产精品香蕉| 五月婷婷在线观看视频| 国产日韩成人| 91麻豆网| 老妇高潮潮喷到猛进猛| 国产精品一区二区三区免费观看| 黄色在线网站| 国产睡熟迷奷系列91爆料| 久久精品午夜| 久久久久99人妻一区二区三区 | 中文字幕一级| 正文第1章初尝云雨| 成人777| 成人av免费在线观看| 精品国产乱码久久久久久图片| 国产精品19久久久久久不卡| 乱伦精品| 午夜精品小视频| 亚洲精品一区二区三区2023年最新| 韩日一级二级性爱| 成人三级在线观看| www精品视频| 色天使在线视频| 91精品国产色综合久久不卡蜜臀| 免费精品| 91成人无码看片在线观看网址| 无码在线免费视频| 国产超碰人人模人人爽人人添| 欧美亚洲国产视频| 精品少妇人妻av无码中文字幕| 成人性生交大片免费看5| 秋霞三级伦电影| 日批视频网站| 久热国产精品| 欧美日韩爱爱| 人妻饥渴偷公乱中文字幕| 91丝袜视频| blacked精品一区国产99| 国产精品IGAO视频网网址| 精品视频国产| 奶大灬好大灬好硬灬好爽在线播放| 亚洲一区自拍| 五月婷婷色色午夜| 国产原创在线播放| 日韩无码内射| 无码一区二区三区| 欧洲AV无码精品色午夜飞机馆| 久久福利导航| 69AV在线观看| 西西午夜无码大胆啪啪国模| 中日韩无码精品| 另类TS人妖一区二区三区| 成人免费无遮挡无码黄漫视频 | 精品国产91久久久久久久黄无码| 国产女主播一区| 精品天堂| 丁香无码| 99无码人妻| 麻豆三级片| 老熟女太熟了A91V| 欧美人和黑人牲交网站上线| 日韩精品久久中文字幕| 91亚色视频在线观看| 午夜探花| 亚洲AV乱码一区二区三区挤奶 | 91在线| 国产精品国产三级国产aⅴ9色| 欧美久久免费| 久久久久久久久久久99精品无码| 国产成人精品免高潮在线观看韩漫| 亚洲第一毛片| 看毛片网址| 视频一区二区在线| 亚洲午夜久久久久久久久红桃 | 午夜日韩| 欧美一区久久| 91麻豆国产视频| 黄频在线播放| 成年人性爱视频免费看| 色图无码| 亚洲AV无码成人网站久久国产| 无码国产精品96久久久久孕妇| 久久AV网站| 五月天丁香| 天天日日日| 乱伦综合网| 中文字幕视频在线观看| 久久精品福利| 亚洲性爱无码| 无码人妻在线| jzzijzzij欧洲成熟少妇| 欧美极品欧美精品欧美图片| 国产日韩欧美| 三级网站在线| 福利视频一区| 99精品久久久久久人妻精品| 91精品国产日韩91久久久久久| 无码人妻AV一区二区| 亚洲性爱AV| 国产精品毛片一区二区在线看| 制服丝袜在线播放| 一区二区三区日韩精品| 亚洲无码内射| 风韵多水的老熟妇偷拍网站| 亚洲精品视频在线播放| 久久噜噜| 久久久91精品国产一区苍井空| 午夜AV在线| 黄视频网站| 国产熟女自拍| 3d动漫精品一区二区三区| 午夜视频免费| 91精品国产一级毛片国语版| 秋霞一道本| 一本一本久久a久久精品牛牛影视| 亚洲综合色视频| 久久成人精品| 欧美日韩在线一区二区| 黄片应用下载| 婷婷色在线| 国产伦精品一区二区三区男技 | 国产精品亚洲五月天丁香| 午夜一级毛片| 小黄片在线免费观看| 欧美精品国产| 天天干伊人久久| 欧美高清一级| 日韩国产精品一级毛片在线 | 欧美一区二区三欧A片直播| 91在线精品一区二区三区| 色情无码免费视频网站在线观看| 日韩久久无码视频| 天天插天天透| 韩国无码在线观看| 亚洲高清无码在线| 人妻,精品中区| 国产精品二| 色色色综合网| 亚洲AV成人无码网站天堂久久| 免费99精品| 日韩精品综合| 欧美日韩一级黄片| 亚洲精品菠萝久久久久久久| 久久天天躁狠狠躁夜夜躁 | 97超碰人人操| 福利姬在线视频| 二区三区无码| 高清无码视频在线播放| 久久高清Av| 久草福利在线视频| 高清无码视频在线播放| 欧美操逼网址| 国产日韩在线播放| 国产乡下妇女做爰| 天天看天天操| 精品九九| 国产熟女鲁鲁视频| 国产精品久久一区二区三区| 韩国无码一区二区三区精品| 无码乱伦视频| 久久久黄色网| 国产精品99在线观看| 91精品久久| 99国产一区| 欧洲精品一区| 国产爽爽爽| 国产精品一二三产区m553小说 | 中文字幕操逼视频| 五月天综合网| 激情内射亚洲一区二区三区爱妻| 欧美性生交片4| 日本无码专区| 91啪啪| 岛国视频一区在线| 九色视频在线观看| 在线看片日韩| 爆乳熟妇一区二区三区爆乳漫画| 中文字幕无码在线观看视频| 尤物视频网站| 久久人妻人人爽| 91精品国产自产精品男人的天堂| 亚洲一区二区在线| 9l视频自拍蝌蚪9l视频成人| 黄片无码视频| 在线观看亚洲视频| 91性高潮久久久久久久久| 岛国片在线观看| 夜夜嗨一区二区| av中文字幕一区| 欧美一区二区在线观看视频| 极品少妇XXXX精品少妇| 躁躁躁日日躁| 亚洲天堂无码| 久久国产精品久久久| 亚洲AV无码一区二区三区蜜柚| 精品少妇人妻av无码中文字幕| 三级视频在线播放| 探花三区| h片在线观看| 成人久久大片91含羞草| 伊人春色av| 麻豆乱码国产一区二区三区| 一区二区三区精品在线| 国产精品久久久久久白浆| 五月婷婷av| 欧美一区二区三区免费A片老妇人| 国产欧美一区二区精品97| 新久久久久久一级毛片免费看| 极品少妇XXXX精品少妇| 久久中文视频| 日韩精品一区二区三区免费视频| 黄色操日本| 欧美久久久久| 国内自拍偷拍视频| 91大神精品| 国产精品一区二| 国产精品va无码一区二区臀| 国产做a爰片毛片A片美国| 天天操人人摸| 高清无码免费| 日本乱伦视频| 一级黄片在线| 久久久久人妻精品一区二区红楼梦| 色午夜婷婷| 99视频精品| 欧美日韩在线观看视频| 无码人妻精品一区二区中文| 成人午夜福利在线观看| 日本成人一区二区三区| 性爱乱伦视频| 少妇熟女视频一区二区三区| 一区二区三区中文字幕| 东京热男人的天堂| 男人的天堂电影院| 91久久免费视频| 麻豆导航| 91亚洲国产成人久久精品网站| 怡红院av在线| 日韩精品欧美成人二区蜜臀| 无码人妻毛片丰满熟妇区毛片色欲| 99亚洲精品| 人妻体体内射精一区二区| 拍真实国产伦偷精品| 九色人妻| 99视频免费观看| 亚洲无码三级电影| 欧美日韩国产精品一区二区| 99国产精品久久久久久久久久久| 日本人妻中文字幕| 成人在线观看网站| 91成人无码看片在线观看网址| 免费下载黄片| 亚洲欧美另类在线| 国产精品久久久久久久久久九秃| 久久精品人妻少妇一区二区| 国产成人精品免高潮在线观看| av在线视屏| 国产视频精品一区二区三区| 久久色视频| 色臀淫乱拳交| 丁香激情五月天社区| 99视频精品全部在线观看下载| 久久人人爽人人人人片| av香蕉| 国产又黄又粗又猛又爽| 午夜福利视频导航| 成人在线免费视频| 亚洲 欧美 综合| 亚洲国产激情| 欧美日韩一级二级| 中文字幕精品一区二区三区精品| 黄网站在线观看| 日韩AV无码专区| 亚洲明星AV网址| 国产无码九一久久| 午夜一二三| 亚洲无码中出| 特级毛片网站| 性无码一区二区三区在线观看| 亚洲国产精品无码影视| 国产农村久久精品A片| 熟女二区| 亚洲欧美在线播放| 免费一区二区| 亚洲一区二区三区| 国产手机视频在线| 久久99久久| 欧美在线色| 国产乱码精品一区二区三区中文 | 伊人五月| 国产精品一区二区三区在线免费观看| 国产人和拘做受视频免费| 免费无码国产在线56| 久久精品中文| 久久精品人妻一区二区| 一区国产精品| 在线观看无码视频| 免费视频一区| 国产日韩视频| 白浆一区| 日本黄色三级片| 婷婷五月天基地| 加勒比在线视频| 国产粗语刺激对白性视频| 日韩黄色网址| 性色AV网站| 日韩性爱av免费观看| 处一女一级a一片| 亚州Av无码| 无码国产视频| 黄页网站在线免费观看| 中文字幕视频免费| 国产精品久久久久av| 久激情内射婷内射蜜桃欧美一级| 国产精品va无码一区二区臀| 色臀淫乱拳交| 国产成人在线视频观看| 国产真实乱伦| 日韩无码精品视频| 狠狠做六月爱婷婷综合aⅴ| 人人色人人操| 秋霞三级伦电影| 色妺妺视频网| 久久午夜视频| 欧美精品一区二区三区| 乳色无码| 一级黄色电影网站| 国产女人18水真多18精品一级做| 欧美熟妇精品一区二区蜜桃视频| 婷婷综合在线观看| 欧美视频一区| 真实国产精品亲子伦视频对白| 亚洲成人激情在线| 免费国产黄片| 国产精品久久久久久黄无码| 欧美日韩在线视频播放| 无码精品久久| 艳妇h圆房~h嗯啊| 超碰欧美| xxxxx国产| 三级黄视频| 国产精品久久久一区二区| 国产在线精品一区二区聂小雨| 成人做爰视频WWW| 岛国av无码在线观看地址| 亚洲AV无一区二区三区久久| 最新国产精品视频| 色噜噜狠狠一区| 高清免费无码| 风间由美一区二区| 少妇精品| 国产粉嫩呻吟一区二区三区| 911精品国产一区二区在线| 一男一女一级一片| 国产三级在线播放| 99久久精品免费视频| 日韩综合| 强奸91| 婷婷伊人| 91精品国产综合久久久蜜臀图片| 午夜成人福利视频| 国产三级片视频在线观看| 国产精品第1页| 色婷婷91| 18禁网站| 国产精品国产三级国产普通话一| 亚洲天堂一区二区| 亚洲欧美一级特黄大片| 欧美精品亚洲| 午夜电影网站| 色一区导航| 无码中文字幕在线观看| 又做又爱视频免费| 国产91熟女高潮一区二区| 欧美日韩精品久久| 久久久夜| 欧美亚洲中文字幕| 欧美人妻一区| 日韩国产中文字幕| 拍国产真实乱人偷精品| 在线观看亚洲一区二区| 欧美黑人xxx| 中国国产黄片| 99久久久国产精品无码免费| 国产又黄又硬又粗| 午夜精品久久久久久久男人的天堂| 天堂网av在线| 免费无码性爱视频| 亚洲黑人Av| 99久久久国产精品免费蜜臀| 又黄又禁视频无遮挡直播 | 一级特黄60分钟毛爽免费看| 日韩片在线观看| 麻豆视频免费在线观看| 国产成人AV| 欧美性爱自拍视频| 无码精品免费| 国产成人无码不卡精品久久久| 中文字幕人妻无码系列第三区 | 国产精品电影一区| 免费国产一区| 久久中文视频| 人妻丰满熟妇无码区免费| 无码电影在线看| 中文字幕无码一区二区三区一本久 | 久久久久久网站| 免费啪啪网站| 日屁视频| 99精品在线| 亚欧激情乱码久久久久久久久| 日韩AV专区| 欧美不卡一区二区| 久操免费视频| 黄色片视频网站| 91在线看视频| 一级国产精品| 国产不卡AV在线| 日韩免费在线观看视频| 美女无遮挡免费网站| 国产精选视频在线观看| 五月天操操| 欧美日韩性| 亚洲欧洲一区| 五月天伊人| 日本久久久久| 国产精品一二区| 亚洲中文字幕AV| 日韩精品视频在线免费观看| 久青草免费视频| 宅男噜噜噜66一区二区| 亚洲第一毛片| 欧美视频一区二区| 国产精品久久久久久久久久网曝门| 91人妻无码| 精品国产无码在线观看| 国产aⅴ激情无码久久久无码| 91久久精品| 波多野结衣中文字幕一区二区三区| 苍井空与黑人90分钟全集| 欧美高清一区| 天天天天干| 婷婷视频在线| 一级黄色大片| 天天干夜夜草| 亚洲精品无码在线观看| 中文无码字幕| 亚洲欧美日韩精品无码一区二区| 97色色网| 午夜精品一区| 综合另类| 91精品人妻一区二区三区| 一级黄片免费看| 91国偷自产一区二区三区老熟女| 午夜精品久久久久久久| 无码免费一区二区三区电影| 人人爱人人操人人摸| 伦一理一级一A一片| 少妇熟女视频一区二区三区| 91久久| 色天堂影院| 亚欧日美韩在线观看| 友田真希一区| 亚洲熟女性爱视频| 午夜毛片视频| 精品无码在线| 乱伦一区二区三区| 中文字幕一区二区三区乱码| 久久精品国产亚洲av丁香| 亚洲制服丝袜| 欧美天天干| www.尤物| 国产精品一级| 少妇一夜三次一区二区| 国产好爽又高潮了毛片91| 亚洲精品一区二区三区中文字幕| 友田真希一区| 一级做a视频| 国产精品一区二区三区在线| 亚洲无码高清视频| 国产熟女AV| 亚洲婷婷五月| 国产凹凸熟女一区二区三区| 四季AV一区二区夜夜嗨| 一级特黄色大片| 蜜臀AV在线播放| 亚洲无码三级片| AV第一福利大全导航| 色婷婷av久久久久久久| 精品无人区一区二区三区蜜桃小说| 免费黄色在线网站| 99re6在线视频| 九九热在线观看| 亚洲熟妇XXXXX| 一级全黄60分钟免费网站| 婷婷国产精品| 乱伦av中文字幕| 在线一区二区三区| 亚洲视频在线一区二区| 一区二区三区三级片| 久久久精品国产人妻喷水| 中文人妻| 亚洲国产毛片| 国产三级日本三级在线播放| poronodrome极品另类| 搡老女人老91妇女老熟女| 国产精品女同| 亚洲乱伦网站| 曰本无码人妻丰满熟妇啪啪| 国产精品女| 欧美一区在线视频| 欧美亚洲性爱| 久久久久久久久精品| 亚洲女同视频| 亚洲精品久| 亚洲国产精品毛片AV不卡下载 | 91视频精品| 无码流出在线播放| 久久久久av| 中文字幕一区二区三区精华液| 四季AV一区二区夜夜嗨| 日韩欧美在线一区二区| 久久成人毛片| 婷婷性爱视频| 国产精品无码电影| 国产一区AV在线| 97碰碰碰| 日韩欧美一级| 中文字幕在线人妻| 91在线免费观看| 国产无码强奸视频| 国产三级片在线看| 国产精品对白久久久久粗| 日韩毛片免费看| 在线观看中文字幕| 欧美日韩另类视频| 久久久久久九九九九| 我与岳干柴烈火| 国产成人精品自拍| 国产精品vⅰdeoXXXX国产| 日一区二区| 色综合色综合网色综合| 琪琪人妻一区| 熟妇人妻系列aⅴ无码专区友真希| 91婷婷国产欧美一区二区| 成人性生交大片费看中文| 日韩久久人妻| 国产原创精品| 91久久婷婷| 日韩午夜av| 亚洲国产精品久久人人爱潘金莲| 天天日综合| 成人片黄网站色大片免费毛片| 一级特黄AAAA片| 欧美精品无码少妇a 6 2v久| 免费精品无码一级毛片牛牛影视| xxxx18一20岁hd| 黄色大片网址| 国产精品自拍探花视频| 国产黄色片在线观看| 国产视频手机在线| 日韩一级黄| 国产精品免费观看视频| 欧美一级a一级a爰片免费免免| 天天操天天日天天爽| A片高潮狂喷白浆| 99热免费| 日韩精品观看| 老妇高潮潮喷到猛进猛出| 毛片软件| 亚洲色哟哟| 亚洲综合一区二区| 精品一级毛片| 超碰人人人人人人| 国产麻豆精品| 欧美日韩精品在线| 精品二区在线观看| 亚洲自拍三区| 超碰av在线| 成人精品视频在线| 成人日韩无码| 潮喷在线| 亚洲免费色视频| 亚洲午夜av一二三区熟女| 日本高清视频在线观看| 右手影院亚洲欧美| 欧美极品JIZZHD欧美| 国产深夜福利| 国产精品无码一区| 国产三级片视频在线观看| av日韩一区| 狠狠干综合| 欧美三级片视频在线观看| 国产变态操逼视频| 二区三区无码| 操逼无码视频| 亚洲高清毛片| 一区高清无码| 国产精品欧美在线| 国产无码高清视频| 乱淫视频| 少妇又色又紧又爽又刺激视频| 五月天就要操| 精品久久久久久| 色综合久久久| 91无码人妻| 国产成人精品一区二三区| 99久久久无码国产精品无卡| 欧美综合图|